Zhongguan welders can automatically heat weld together two plastic parts of various kinds in batches, without necessity of any auxiliary material. The bonding surface can reach the relevant water leakage, air leakage, tensile strength and compression strength requirements.

XQD-200WB
便携式手动
中观塑料管材焊接机

焊接管材直径（mm）：
φ50～φ175
适用于施工工地现场移动焊接塑料管材。

XQD-300W-1200W Series
Vertical Full Automatic Plastics Welder

Maximum bonding area
L（mm）×W（mm）：
200×200～1100×1100
Applicable to welding of very long plastic parts, and radial welding of plastic pipes and adapters.

XQM-700
中Computer Controlled Air Leakage Tester

Testing pressure:
0～100KPa ；0～500KPa
Applicable to air or water leakage test of weld face of heat welded plastic parts.

中观XQD-800LB～1600LB
Special full automatic plastic welder for filter plate of filter press

Applicable to full automatic batch welding of two pieces of various plastic filter plates, each within a weight of 60000 grams and an outer diameter of 1600mm×1600mm. No auxiliary material like solder, solvent or adhesive etc. is needed. The machine automatically heat and melt the bonding surface of the two filter plates and then compress and cure them to form one block.

中观XQD-1600QB、XQD-1600HB
Full Automatic Bump Bar Welder

Applicable to full automatic and fast heat welding of plastic bumpers in batches. XQD-1600QB is used to weld together internal plastic parts of front bumper, while XDQ-1600HB is applicable to welding of that of the rear bumper (small passenger car).

Addr: Building 23B, Nanjiing High-Tech Development Zone    Post code: 210061    Tel: 025-58849018    Fax: 025-58842009
E-mail:zgcccn@public.ptt.js.cn      http://www.zgcccn.com